Menu
Plug a Btracking GPS tracker into your vehicles – you can even hide it in seconds – and get all the answers you need to take control of your fleet in real time.
You’ll have all the data you need to get safer drivers and a more efficient fleet. Data such as driver scorecard with speeding reports, the entire day’s stop locations, entry/exit alerts at job sites or customers, and much, much more.
Sends GPS Location every 1 minute when moving, every 6 hours when stopped (customizable)
Accelerometer for Driver Behavior (sudden acceleration, sudden lane crossing, sharp turns, and sudden braking) and movement monitoring
Events Such As engine on/off, vibration alarm, tow detection, door open/close, impact detection are sent with a time stamp and GPS location
Automatic Driver ID Available with RFID card or iButton (Dallas key), and can be configured so that only authorized drivers can unlock or start the vehicle
BTSTX I/O Digital Inputs – Four contact events: two ground sense and two 5VDC – 32VDC positive sense. Analog Inputs – one 0-5VDC. Digital Outputs – two open collector 500mA. Internal analog temperature sensor. Expansion: Add three digital inputs for a total of four ground sense and two positive sense. Add one analog input for a total of two. Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.
BTPLUS I/O Digital Inputs – Three contact events: two ground sense and one 8VDC – 32VDC positive sense. Analog Inputs – one 0-5VDC. Digital Outputs – two open collector 500mA. Expansion: Add three digital inputs for a total of four ground sense and two positive sense. Add one analog input for a total of two Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.
Battery Saving Mode auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require backup battery)
Store and Forward Stores up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage
Starter Kill command can be sent to prevent starting vehicle (once vehicle is stopped and the ignition is turned off)
Monthly Subscription from $19.95 and No Contracts
Network 4G LTE CAT-1, GSM/GPRS or EDGE/HSPA+ (3G)
GPS GPS/GLONASS/BeiDou/Compass,Galileo, QZSS up to 1m (3ft) accuracy
Enclosure Flame retardant ABS/PC IP31
Dimensions 4” x 2.3” x 1.2” LWD (100mm x 58mm x 30mm), weight: 3.8 oz (110gr)
RF 2.4GHz, range 150 ft / 50m
I/O Digital Inputs – three contact events – two ground sense and one 8VDC – 32VDC positive sense Analog Inputs – one 0-5VDC Digital Outputs – two open collector 500mA.
Expansion: Add three digital inputs for a total of four ground sense and two positive sense Add one analog input for a total of two Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.
BLE iBeacon, Eddystone (TLM), or Proprietary RF Tags
Up to 6 temperature sensors via iButton
Operating Temperature -40° to 176° F (-40° to 80° C)
Power 6DC-32VDC tethered to vehicle battery or portable with aux plug connector
Hibernation, Standby, Sleep modes
Options Wifi, USB
Vibration Sensor sensitivity adjustable for automatic security alarm
Driver identification via iButton (Dallas key)or RFID card
Garmin FMI interfaces
Installation In cabin or external roof mount
