BHYP

Ultimate Hybrid Battery Tracker

Features & Benefits

  • Up to 5 Year Battery Life
  • Supports 6 wired digital temperature & humidity sensors
  • Disconnect/Connect Alerts
  • Store & Forward up to 5,000 events when out of cellular coverage
  • BLE supports Tool Tracking & wireless temperature, humidity sensors
  • Mounts with heavy duty magnets, screws or 2-way tape

Highlights

The Toughest, Longest Lasting Heavy Duty Asset Trackers – Protect Non-Powered and Occasionally-Powered Trailers, Containers & Machines

Trailers and containers carry valuable cargo yet are highly vulnerable to loss and damage as these assets are often left unattended for long periods of time.

With Btracking, from Day 1 you’ll know where your trailers and containers are, when they move, where they’ve been, and when and where they stop.

For assets such as trailers and machines that are powered but may sit unpowered for periods of time, a hybrid tracker is the way to go. It reports often when on power, with a powerful battery that reports 6 months or more on a single charge when off power.

With an intuitive yet powerful platform, real time alerts and mobile apps, you can view location, usage, climate, unauthorized use and more. All alongside your vehicles, equipment, tools and smartphones.

Weatherproof Asset/Trailer/Machine/Vehicle Tracker

Long-Life Rechargeable Battery up to 5 Year Battery Life

Temperature & Humidity Monitoring Supports up to 6 wired digital temperature sensors, allowing you to monitor up to 6 different cold zones simultaneously.

Disconnect/Connect Alerts Auto alert when and where the external power is connected / disconnected.

Stores & Forwards up to 5,000 events when out of cellular coverage then sends automatically when back in cellular coverage.

BLE supports Tool Tracking & Sensor Data including temperature, pressure, load, light and more.

Easy Installation Mounts with heavy duty magnets, screws or 2-way tape.

Monthly Subscription from $19.95 and No Contracts

Technical Specs

Cell Network 4G CATM1/NB1 with 2G Fallback. Supported bands Cat.M1 & NB1, LTE-FDD:B1/B2/B3/B4/B5/ B8/B12/ B13/B18/B19/B20/B26/B28 LTE-TDD: B39 (for Cat.M1 only) GSM850/GSM900/

Frequency Bands Quad-Band ( European 900/1800/ 2100,American 850/1900/2100

GPS GPS/GLONASS/BeiDou/Compass,Galileo, QZSS up to 1m (3ft) accuracy. GPS Technology – MTK GPS Technologies – 66 channels

RF 2.4GHz proprietary protocol, BLE (supports iBeacons, TLM and custom protocols). Range Up to 220 ft / 70m. Actual range may vary depending on RF interference, building materials, and physical obstacles Data Transmit Automatically connects to any associated Piccolo tracker and transmits every 20 seconds

Enclosure ABSPC water proof IP67 enclosure, rated UL94V-0. Shock/Vibration/Mechanical: meets or exceeds EIA standard RS-316B 3G (operating), 20G (non \operating) XYZ 3 directions. Meets SAE J1455

Dimensions 4.9” x 3.3” x 1.6” (125mm x 87mm x 41mm)

Weight 3.7oz (105g) without the batteries

Operating Conditions -22º to 176º F (-30º to 80º C). Humidity: 0 to 99% 110F (40C), non-condensing

Power Operated by Rechargeable battery – one 4.2 VDC Lithium rechargeable battery pack with a capacity of 7800mAh. When fully charged has the capacity of transmitting around 5000 GPS position. The unit has an internal fast charger. The batteries are charged via an external of the shelf standard 6-24VDC regulated power supply wall powered (110-220 AC) that plugs into the unit via a waterproof connector. Charge time is around 4-5 hours. Externally powered: runs in continuous mode acting as a real-time tracker for as long as external power is available. The internal battery will recharge for as long as external power is available. Current consumption from battery: • Standby mode: 40ma at 3V • Sleep mode: 45uA at 3V • Transmit mode: 1.8A pulse at 3V.

Buffers up to 5000 messages

Built-in triple axis accelerometer.

Operating Voltage 12/24 v

BLE Bluetooth Low Energy interface peripheral support