GPS Tracking Accessories - Products & Specs
Accessories
Vehicle Tracking Accessories
Products & Specs
Btracking carries a complete line of GPS tracking accessories.
We carry many more accessories than shown here, please ask if you don’t see what you’re looking for.
To discuss your tracking needs or place an order, give us a call at 866-233-0953, send the contact form, or chat with us.
BlueLink
BLE Electronic Logging Device
![](https://btracking.com/wp-content/uploads/2024/05/bluelink.webp)
- Universal Use with any smartphone or tablet
- Plug & Play Plugs into the vehicle’s ECM port via a J1708 (6pin), J1939 (9pin), J1708/J1939 (9pin) dual pass through connector or an OBDII connector.
- Diagnostic Data Sends via BLE to the DriverLog app, the engine diagnostics data required by FMCSA & Canadian DOT for ELD compliance including Odometer, Engine Hours, Engine ON / OFF
- Additional Diagnostic Sends periodic engine diagnostic codes to the fleet management server, plus fuel level, fuel consumption and more
- Specs Dimensions 2.71″ x 1.49″ x 0.75″ (69mm x 38mm x 19mm); Operating Temperature -22º to 176º F (-30º to 80º C)
OBD II Y-Cable
12" or 48" (Extension Side)
![GPS Tracking Accessories](https://btracking.com/wp-content/uploads/2023/11/btracking-products-OBDIIY-Splitter-Cable.webp)
OBD II Y Splitter Cable - 12" or 48" (Extension Side)
- Easy Install Installs in minutes
- Conceals Tracker Secure tracker out of sight behind dashboard. Allows tracker to be connected to the vehicle and replaces the native OBD II port with the snap-in style connector.
- Universal OBD II side of the cable is 12" length
- Heavy Gage, Higher Quality All 16 pins are connected between the 3 connectors, 22AWG wire for signal lines and 20AWG wire for power and ground
- Guaranteed Guaranteed compatibility with Btracking GPS Trackers
- Keeps Port Open OBDII port remains open. Never lose your tracker at the mechanic's shop
- Extension side is 12" or 48" in length
OBD II Flat Extender Cable
12" or 36"
![GPS tracking accessories by Btracking](https://btracking.com/wp-content/uploads/2023/11/btracking-products-OBDII-Flat-Extender-Cables.webp)
OBD II Flat Extender Cables - 12" or 36"
- Easy Install Installs in minutes
- Avoid Accidental Contact Position tracker away from dash. Flat OBDII port.
- Guaranteed Guaranteed compatibility with Btracking GPS Trackers
- Secure Tracker use to secure the tracker in a rigid location for CrashBoxx™by Calamp accident reporting
OBD II 180 deg Extender Cable
36"
![Cable extender tracking accessories](https://btracking.com/wp-content/uploads/2023/11/btracking-products-OBDII-180deg-Extender-Cable-36.webp)
OBD II 180 deg Extender Cable 36"
- Easy Install Installs in minutes
- Avoid Accidental Contact Position tracker away from dash. Flat OBDII port.
- Guaranteed Guaranteed compatibility with Btracking GPS Trackers
- 180 degree 24 AWG cable
Multifunction Key FOB
Automatic Driver ID, Panic Button and More
![Driver ID Key Fob](https://btracking.com/wp-content/uploads/2023/11/btracking-products-Multifunction-Key-FOB.webp)
Multifunction FOB for Automatic Driver ID, Panic Button and More
- Driver ID Identify drivers automatically
- Control Unauthorized Use Shows when a vehicle is driven by an unauthorized driver
- Features 1 yr (approx) battery life, splash resistant enclosure, optional buzzer, LED low battery indicator
- Multifunction BLE Low Energy Bluetooth key FOB buttons can be programmed to control the GPS Tracker's actions. For example, buttons can be programmed to turn GPS off or on, send a panic notice, send locations, and more
- Improve Timekeeping Know exactly when drivers start and end their day
- One small disadvantage - the GPS Tracker must configured to read all the fobs of "allowed" drivers. Therefore a button push by any "allowed" driver within range will be read and reported by the tracker. Simply ask drivers to move the vehicle 50 ft from another fleet vehicle before pushing the fob button.
Push Button FOB
Single Button FOB for Driver ID
![Driver ID Solutions Btracking Key Fob](https://btracking.com/wp-content/uploads/2023/11/btracking-key-fab-e1721771110865.webp)
Driver ID with a Button Push
- Use with OBD Plug in GPS Trackers
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Accurate Time Reporting Know exactly when drivers start and end their day
- BLE-Enabled GPS Tracker scans for fobs within range (approx 50 ft) and reports every ID button push by driver
- Block Ignition Ignition can be prevented for unauthorized drivers (device dependent)
- Auto Log Out Automatically log out drivers upon exceeding a defined stop interval
- One small disadvantage - the GPS Tracker must configured to read all the fobs of "allowed" drivers. Therefore a button push by any "allowed" driver within range will be read and reported by the tracker. Simply ask drivers to move the vehicle 50 ft from another fleet vehicle before pushing the fob button.
HID/RFID Card Reader
for Driver ID
![Btracking tracking accessories](https://btracking.com/wp-content/uploads/2023/11/btracking-products-HIDRFID-Card-Reader.webp)
HID/RFID Card Reader for Driver ID
- Driver ID Identify drivers as they log in and out with an HID or RFID card
- Control Unauthorized Use Shows when a vehicle is driven by an unauthorized driver
- Use Your Own Cards Use your existing building entry cards. Our card readers can read your cards.
- Improve Timekeeping Know exactly when drivers start and end their day
RFID/HID Card and Reader
Driver ID with a RFID/HID Card
![Driver ID solutions Btracking Card Reader](https://btracking.com/wp-content/uploads/2023/11/btracking-Card-Reader.webp)
Driver ID with a RFID/HID Card and Card Reader
- Drivers tap their card on the reader
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Simplifies Timekeeping Reports start time, stop time, driving duration
- Use our cards, or your own RFID or HID Cards
- Track Driver History See the driver history of every vehicle
iButton Reader 1-Wire
for Driver ID
![Ibutton reader](https://btracking.com/wp-content/uploads/2023/11/btracking-products-iButton-Reader.webp)
For Driver ID
- For Use with BT2M1 and other devices requiring wired readers
- Control Unauthorized Use Shows when a vehicle is driven by an unauthorized driver
- Driver ID Identify drivers as they log in and out with an iButton
- Improve Timekeeping Know exactly when drivers start and end their day
iButton Reader with Connector
for Driver ID
![Ibutton reader & connector](https://btracking.com/wp-content/uploads/2023/11/btracking-products-iButton-Reader-with-Connector.webp)
iButton Reader with Connector for Driver ID
- For Use with BT263 Only
- Control Unauthorized Use Shows when a vehicle is driven by an unauthorized driver
- Driver ID Identify drivers as they log in and out with an iButton
- Improve Timekeeping Know exactly when drivers start and end their day
iButton Driver ID FOB
for Driver ID
![Driver ID Butoon & Fob](https://btracking.com/wp-content/uploads/2023/11/btracking-products-iButton-Driver.webp)
iButton Driver ID FOB
- Driver ID Automatically identify drivers
- Improve Timekeeping Know exactly when drivers start and end their day
- Prevent Unauthorized Use Shows when a vehicle is driven by an unauthorized driver
- Log Drivers Automatically Log out the driver upon exceeding a stop interval defined by you