Truck Tracker | Telematics Gateway | BTSTX

Price range: $219.99 through $239.99

A Robust Telematics Gateway Built for Dynamic Flexibility. Flexible Installation – Wired, J1939, OBDII, and aux power harness options.

Driver Monitoring – Run time and performance diagnostics including speeding, accident detection, extreme braking and cornering, etc.

Remote Safety Lockout – Easily disable vehicles or equipment, and remotely enable theft detection and stolen vehicle recovery

Integrates with ProFleet ELD, Driver ID, tags and sensors. Internal backup battery, Digital and Analog I/O options, triple-axis accelerometer; vehicle diagnostics.

Made exclusively for the ProFleet Platform.

See Terms & Conditions for details.

Added features may increase subscription price. Following initial term, subscription continues month-to-month. Cancel anytime with 10 business days’ notice.

Frequently Bought Together

Y-Cable OBDII 12"/12"

OBDII Y-Cable - 12" OBD Port side; 12" Extension side.

Y-Cable OBDII 12"/48"

OBDII Y-Cable - 12" OBD Port side; 48" Extension side.

Description

Telematics Gateways provide GPS tracking along with a host of additional features such as sensors for monitoring the vehicle, sensors for monitoring the climate in the cargo hold, driver communication with dispatch, HOS electronic logging, and more.

Sends GPS Location every 1 minute when moving, every 6 hours when stopped (customizable)

Accelerometer for Driver Behavior (sudden acceleration, sudden lane crossing, sharp turns, and sudden braking) and movement monitoring

Events Such As engine on/off, vibration alarm, tow detection, door open/close, impact detection are sent with a time stamp and GPS location

Automatic Driver ID Available with RFID card or iButton (Dallas key), and can be configured so that only authorized drivers can unlock or start the vehicle

BTSTX I/O Digital Inputs – Four contact events: two ground sense and two 5VDC – 32VDC positive sense. Analog Inputs – one 0-5VDC. Digital Outputs – two open collector 500mA. Internal analog temperature sensor. Expansion: Add three digital inputs for a total of four ground sense and two positive sense. Add one analog input for a total of two. Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.

Battery Saving Mode auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require backup battery)

Store and Forward Stores up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage

Starter Kill command can be sent to prevent starting vehicle (once vehicle is stopped and the ignition is turned off)

Made exclusively for the ProFleet Platform

Product Sheet

BTSTX Truck Tracker Telematics Gateway CAT M1

Cell Network LTE CAT M1
Dimensions 3.3” x 2.0” x 1.0”
Weight 3.2 oz
Internal or External GPS, GNSS and Cellular antennas
Internal backup battery 1800 mAh Li-Ion
Built-in triple axis accelerometer
Operating Voltage 6/32 v
BLE Bluetooth Low Energy interface peripheral support
Easily concealed 
Reports Location At Least Every Minute when moving, every 6 hours when stopped (customizable)

Additional information

Weight 6 oz
Dimensions 5.7 × 2.1 × 1.3 in
BLE

No BLE, BLE for Tool Tracking, BLE for ELD

Btracking BTAIR Solar Powered Mini Air Tracker
Introducing The

BTAIR

A Mini Solar-Powered GPS Tracker

Track any asset or person with the new solar powered Mini Air Tracker from Btracking. GPS tracking for just pennies a day!

0