Telematics Tracking Products & Specs
Truck Trackers - Telematics Gateways
GPS Truck Trackers with Advanced Telematics & IoT
Products & Specs
Thanks for a good summer of services! I received a lot of good words about how easy the website was to navigate and track the whereabouts of our employees. Next summer will get a lot more devices activated.
K.L.
American, NJ
Full Product Line - Truck Trackers - Telematics Gateways for Advanced Applications, Heavy Vehicles
To discuss your tracking needs or place an order, send the contact form, chat with us, or call us at 866-233-0953.
BT364 Telematics Gateway Tracker
Dynamic Flexibility
![Btracking telematics gateway tracker - BTL3640](https://btracking.com/wp-content/uploads/2023/11/btracking-products-BTL3640-.webp)
Includes OBD II or Vehicle Specific J1939 Harness
BT364 Standard
BT364W Weatherproof
- Fully Programmable to meet your requirements
- Input/Output Capacity ignition input / 4 digital inputs / 2 analog inputs / 3 digit outputs / 1-wire interface supports Automatic Driver ID (Fob, HID/RFID card, Dallas Key), starter interrupt, temperature sensing, doors, lights, fuel sensors, 3rd party add-on sensors, more
- Driver Behavior Monitors speed, harsh driving, impact detection, programmable audible warnings
- The Most Comprehensive Vehicle Data Fuel level, speed, battery voltage, odometer, coolant temperature, RPM, VIN, seatbelt use, engine data, fault indicator/DTC codes, diesel particulates, tire pressures, VIN, turn signals, engine oil temperature, average fuel economy, transmission fluid temperature, throttle position, ambient air temperature, DEF levels. *Note, data is vehicle dependent and may not be available on certain vehicles
- Engine Control Unit (ECU) Interface Supports both J1939 heavy duty and OBDII light duty vehicles
- BLE Bluetooth connectivity supports add-ons such as automatic Driver ID
- Optional WiFi Hot Spot
- Optional Weatherproof IP67 case, 5.2 Ah battery (500 message cycles/charge lasts up to 6 months on a single charge)
- Optional Panic Button, CrashBoxx™ with 99% accurate crash alerts, severity rating, accident reconstruction, predictive physical damage
- Advanced Peripherals Support Android™, Magellan®, Garmin®, TomTom®, MDT and others
Specifications
- Cell Network 4G LTE CAT M1 / 2G Fallback
- Dimensions 5.7 in x 2.1 in x 1.3 in (BTL3640), 7.1 in x 3.4 in x 2.2 in (BTL3640W)
- Weight 5 oz (BTL3640), 12 oz (BTL3640W)
- Internal GPS, GNSS and Cellular antennas
- Buffers up to 20000 messages
- Internal backup battery 1000 mAH Li-Ion (BTL3640), 5200 mAH Li-Ion (BTL3640W)
- Built-in triple axis accelerometer (all models), gyroscope (Global models)
- Operating Voltage 12/24 v
- Integrated Programmable Buzzer
- BLE Bluetooth Low Energy interface
BT423 Deluxe Telematics Gateway Tracker
The Industry's Top Rated Telematics Gateway Tracker
![Btracking Telematics Gateway Products BTL4233](https://btracking.com/wp-content/uploads/2023/11/btracking-products-BTL4233-1.webp)
Includes OBD II or Vehicle Specific J1939 Harness
- Fully Programmable
- Supports a wide array of applications and interfacesFor example, the serial ports supply switchable power at selectable voltages to ease the installation of peripheral data devices
- Extensive 11 Input/5 Output Capacity supports automatic Driver ID (Key Fob, HID or RFID), starter interrupt, temperature sensing, doors, lights, fuel sensors, 3rd party add-on sensors, and more
- Driver Behavior Speed, ignition status, harsh driving monitoring, impact detection, programmable audible warnings
- Complete Diagnostic Vehicle Data Fuel level, battery voltage, odometer, temperature, RPM, VIN, seatbelt use, engine data, fault codes, mores
- Engine Control Unit (ECU) Interface Supports both J1939 heavy duty and OBDII light duty
- BLE Bluetooth connectivity supports add-ons such as automatic Driver ID
- WiFi Hot Spot additional data rates apply
- Optional CrashBoxx™ 99% accurate crash alerts, severity rating, accident reconstruction, predictive physical damage
- Advanced Peripherals Support Android™, Magellan®, Garmin®, TomTom®, MDT and others
Specifications
- Cell Network 4G LTE CAT1 / 3G HSPA/UMTS
- Dimensions 4.3 in x 3.2 in x 0.9 in
- Weight 4 oz
- Internal GPS, GNSS and Cellular antennas
- Optional External GPS and Cellular antennas
- Buffers up to 20000 messages
- Internal backup battery 1000 mAH Li-Ion
- Built-in triple axis accelerometer
- Extensive i/o support ignition input / 7 digital inputs / 4 analog inputs / 5 digit outputs / 2 1-wire interfaces / 2 power outputs
- Operating Voltage 12/24 v
- BLE Bluetooth Low Energy interface
BTSTX Telematics Gateway Tracker
Telematics Gateway for Pro Fleet
![Telematics Tracker](https://btracking.com/wp-content/uploads/2023/11/btracking-products-BPSTX-1.webp)
Includes OBD II or Vehicle Specific J1939 Harness
- Sends GPS Location every 1 minute when moving, every 6 hours when stopped (customizable)
- Accelerometer for Driver Behavior (sudden acceleration, sudden lane crossing, sharp turns, and sudden braking) and movement monitoring
- Events Such As engine on/off, vibration alarm, tow detection, door open/close, impact detection are sent with a time stamp and GPS location
- I/O Digital Inputs – Four contact events: two ground sense and two 5VDC – 32VDC positive sense Analog Inputs – one 0-5VDC Digital Outputs – two open collectors 500mA Internal analog temperature sensor. Expansion: Add three digital inputs for a total of four ground sense and two positive sense. Add one analog input for a total of two. Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.
- Automatic Driver ID Available with RFID card or iButton (Dallas key), and can be configured so that only authorized drivers can unlock or start the vehicle
- Battery Saving Mode auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require backup battery)
- Store and Forward The unit can store up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage
- Starter Kill command can be sent to prevent starting vehicle (once vehicle is stopped and the ignition is turned off)
Specifications
- Network 4G CATM1/NB1 with 2G Fallback
- GPS Technology GPS / GLONASS / BeiDou / Compass,Galileo, QZSS up to 1m (3ft) accuracy
- Enclosure Flame retardant ABS/PC
- Dimensions 3.36” x 2” x 1” LWD (85mm x 52mm x 25.4mm) Additional 0.4” (10mm) on each side for mounting brackets, weight: 3.17 oz.(94gr) without batteries
- Environment Operating temperature: -40° to 176° F (-40° to 80° C)
- Power 6DC-32VDC tethered to vehicle battery or portable with aux plug connector. Standby & sleep mode.
- Vibration Sensor sensitivity adjustable for automatic security theft alarm
- Driver Identification via iButton (Dallas key or Passive RFID)
- Up to 6 temperature sensors via iButton
- BLE 4.0 for HOS tablet communication
- Installation Plug and Play with OBDII/J1939 connector prewired to the STX wire harness
BTPLUS Advanced Telematics Gateway Tracker
Advanced Telematics Gateway for Pro Fleet
![Btracking Telematics Gateway Tracker BPSTX-pro](https://btracking.com/wp-content/uploads/2023/11/btracking-products-BPSTX-pro.webp)
Includes OBD II or Vehicle Specific J1939 Harness
- Sends GPS Location every 1 minute when moving, every 6 hours when stopped (customizable)
- Accelerometer for Driver Behavior (sudden acceleration, sudden lane crossing, sharp turns, and sudden braking) and movement monitoring
- Events Such As: engine on/off, vibration alarm, tow detection, door open/close, impact detection are sent with a time stamp and GPS location
- Automatic Driver ID Available with RFID card or iButton (Dallas key), and can be configured so that only authorized drivers can unlock or start the vehicle
- Battery Saving Mode auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require backup battery)
- I/O Digital Inputs – three contact events – two ground sense and one 8VDC – 32VDC positive sense Analog Inputs – one 0-5VDC Digital Outputs – two open collector 500mA. Expansion: Add three digital inputs for a total of four ground sense and two positive sense Add one analog input for a total of two Add RS-232 serial port for a total of two. The additional RS-232 port can support RS-485.
- BLE and WiFi for Driver ID tool and inventory tag tracking, Wifi HotSpot, ELD tablet communication, wireless sensors
- Store and Forward The unit can store up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage
- Starter Kill a command can be sent OTA to kill the starter so once the vehicle is stopped and the ignition is turned off it cannot be turned on again (for safety reasons in most countries it is illegal to OTA turn off the engine or gradually decelerate when the vehicle is moving)
Specifications
- Network Availability 4G LTE CAT-1, GSM/GPRS or EDGE/HSPA+ (3G)
- GPS Technology GPS/GLONASS/BeiDou/Compass,Galileo, QZSS up to 1m (3ft) accuracy
- Enclosure Flame retardant ABS/PC IP31
- Dimensions 4” x 2.3” x 1.2” LWD (100mm x 58mm x 30mm), weight: 3.8 oz (110gr)
- RF 2.4GHz, range 150 ft / 50m
- BLE iBeacon, Eddystone (TLM), or Proprietary RF Tags
- Up to 6 temperature sensors via iButton
- Operating Temperature -40° to 176° F (-40° to 80° C)
- Power 6DC-32VDC tethered to vehicle battery or portable with aux plug connector
- Hibernation, Standby, Sleep modes
- Options Wifi, USB
- Vibration Sensor sensitivity adjustable for automatic security alarm
- Driver identification via iButton (Dallas key)or RFID card
- Garmin FMI interfaces
- Installation In cabin or external roof mount