LoRa Trackers - Products & Specs

LoRa GPS Tracking

Yard Management System

Products & Specs

Thanks for a good summer of services! I received a lot of good words about how easy the website was to navigate and track the whereabouts of our employees. Next summer will get a lot more devices activated.

K.L.

American, NJ

LoRa Yard Management System

To discuss your tracking needs or place an order, send the contact form, chat with us, or call us at 866-233-0953.

LoRa System

From

$ 49

per month per base station

Details

Pro Fleet Cloud-Based and Mobile Tracking Platform
Data included
BLE tags $6/ea
Add-ons:
Wireless sensors
Pause tracking $10/month/base station
Cancel anytime, reactivate anytime (fee applies)
Data Surcharge may apply outside North America
Lifetime Warranty applies if continuous monthly tracking has been maintained. If monthly tracking has been paused or stopped, only the one year warranty applies. Device may be repaired or replaced.
Unlimited Free Support

BSATL1 LoRa Solar Tag Tracker

Tag & Track Mobile Assets

Solar Powered Requires about 8 hrs/day sunlight
Install at 1/2 mile to 3/4 mile Spacing Throughout Yard Transmits 1/2 to 3/4 mile creating a LoRa network throughout the area
Works with BSATX2S Base Station The Base Station performs as a LoRa gateway, uploading data from the BSATL1 trackers to the Platform via cell network
Only Base Stations Requires Sim The only cellular connection (and charge) is for the Base Stations
No Cell Charges for Trackers BPATL1 LoRa trackers do not use a cell network as they communicate via wifi with the BSATX2S Base Stations

Specifications

Network LoRa
High Precision GPS Antenna
Enclosure IP67 Waterproof enclosure
Dimensions 3.30" X 2.25" X 1.34"
Operating Temperature 22º to 176º F (-30º to 80º C)
Power Our LoRa trackers are solar powered
Installation Easily mounted in place with heavy duty magnets, 3M Heavy Duty Tape or screws
Optional Sensors Wireless IoT tags for temperature, humidity, pressure

BSATX2S LoRa Solar Base Station Tracker

Reads & Sends Tag Locations to Platform

Solar Powered Rechargeable battery capable of sending up to 10,000 GPS positions on a single charge
Extremely Long Battery Life Dual 7800 mAh rechargeable lithium batteries
BLE Supports IoT tags, wireless sensors for temperature, humidity, pressure, load, light and more
I/O Optional wire harness supports 2 digital inputs, 1 digital output and 1 analog input for door open/close alerts and wired sensors
Waterproof IP67 waterproof enclosure.
SMS Alarms Can be sent via SMS
Vibration Sensor Motion detection
Programmable Geofence Reporting Can change location report frequency via programmed geofences
Easy Installation Optional magnet mount kit, bolt on bracket kit, or dual side tape

Specifications

Network:

Network availability
GSM/GPRS or EDGE/HSPA+ (3G) or 4G CATM1/NB1

Frequency Bands
2G Quad-Band, 3G European: 900/1800/2100 or 3G US 850/1900 MHZ, 4G NB1: Cat.M1 & NB1, LTE-FDD:B1/B2/B3/B4/B5/B8/B12/ B13/B18/B19/B20/B26/B28 LTE-TDD
GPS Technology:

GPS/GLONASS/BeiDou/Compass,Galileo, QZSS up to 1m (3ft) accuracy

Technology
MTK GPS Technologies – 66 channels
Enclosure:

PLUSTEK PB5001J8BK11 Black, 40% Glass Fiber & Glass Beads Reinforced, Halogen and Red Phosphorus Free

Flame Retardant
UV Stabilized POLYAMIDE 6

Dimensions
7.3” x 2.8” x 1.6” (185mm x 73mm x 41mm) without solar panel and bracket

Weight
9oz (255gr) without the batteries
Environmental:

Operating Temperature
-22º to 176º F (-30º to 80º C)

Storage Temperature
-40º to 221º F (-40º to 105º C)

Humidity
0 to 99% 110F (40C), non-condensing

Shock/Vibration/Mechanical
meets or exceeds EIA standard RS-316B 3G (operating), 20G (non \operating) XYZ 3 directions

Meets SAE J1455
Power:

Operated by Rechargeable battery
the standard is one 4.2 VDC Lithium rechargeable battery pack with a capacity of 7800mA. When fully charged has the capacity of transmitting around 5000 GPS positions.

Optionally a second battery pack can be added with same capacity for transmitting a total of around 10000 GPS positions. The unit has an internal fast charger. The batteries are charged via an external of the shelf standard 6-24VDC regulated power supply wall powered (110-220 AC) that plugs into the unit via a waterproof connector. Optionally the unit can be charged from a car battery via the auxilliary plug. The charge time is around 4-5 for one battery pack.

Solar Powered
the unit configuration remains as described above with a rechargeable battery or two battery packs, the solar panel will charge the lithium batteries at 200Mamp in full sun. In a sunny day the solar panel will charge the batteries with power the equivalent to around 20 GPS transmissions.

Current consumption from battery
Standby mode: 40ma at 3V
Sleep mode: 45uA at 3V
Transmit mode: 1.8A pulse at 3V
I/O:

When equipped with the optional wire-harness, the BPATX2S supports 2 Digital inputs, 1 Digital Output and 1 Analog Input, for event logs such as door open/close, alarm link and various types of sensors
Installation:

For portability
Install mounting bracket on any trailer, container and/or asset

Magnets
For easy installation on metal surfaces

Two sided 3M Industrial tape
for a strong, permanent attachment

Mount
the Piccolo BPATX2S to the asset with screws